4
Complete sensor alignment
1 Select Lanes from the main menu, then Conguration. Click the magnifying
glass icon at the bottom of the screen and choose Show Alignment.
2 Adjust the sensor according to the arrows and colors shown. Green means the sen-
sor is positioned for optimal performance; yellow and red mean you need to adjust.
3 Once the alignment is right, tighten the sensor mount’s strap screws all the way.
For the tool to function properly, trac must be owing freely. Also, if the sensor is
not already aligned close to perpendicular to trac, this tool will display a question
mark, indicating that the sensor is too far out of alignment for the tool to function properly.
5
Configure and verify lanes
Automatic Configuration
Follow the steps below to automatically congure the SmartSensor HD:
1 Select Lanes from the main menu, then Conguration.
2 In the Conguration window, click the Tools icon and select Clear Edit Area.
3 Click the Tools icon again and then click Restart Auto Cfg. Click OK. When prompted to save the
conguration, choose Yes.
Manual Configuration
e tools on the Conguration window (as mentioned above, select Lanes from the main menu, then Con-
guration) can help you manually set lanes and adjust lane setup.
˽ Sidebar Display – Set what the sidebars display: automatically congured lanes, lanes saved
on the sensor, distances to each lane, relative occurrence of events or a track for each detected
vehicle.
˽ Vehicle Display – Sets how vehicles are drawn and what is displayed on them. If set to dis-
play by class, the vehicles show a bin number (see Denitions in Part 6).
˽ Tools – Allows you to save and load congurations.
˽ Magnifying Glass – Lets you show or hide automatically congured lanes, lane names, lane
direction and/or a compass.
˽ Shoulder Area – Clicking in the shoulder lets you add or exclude lanes and/or the shoulder.
˽ Lane Window – Clicking on a lane lets you change information about it.
To save the settings you just changed, click the OK button.
Verify Lanes
To verify the lanes were congured properly, go to the Verication screen. Like the Conguration screen,
this screen contains the Sidebar and Vehicle Display tools, plus these additional tools:
˽ Play/Pause/Stop Buttons – Allow you to control the data display and whether passing
vehicles are being included in the counts.
˽ Lane Adjustment – Click in a lane to adjust lane volume, detection, speed, length or extension time.
˽ Logging – e options in the lower right let you log per vehicle data for verication purposes.
(78 pagine)
(4 pagine)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale